Ender 3 S1 Nozzle Wipe and BTT ADXL345 Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ender 3 S1 mount for a BambuLab Nozzle Wipe and BTT ADXL345 on the rear housing for the bed cable.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 27
- Makes
- 0
- Views
- 558
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
This mount is made for the Ender 3 S1 bed, and uses 2 m3x8mm screws for the ADXL345, 2 m3x10 or m3x12mm screws for mounting to the bed cable, depending on your existing screws on the top of the bed cable, since it uses the existing holes. I designed it to fit these:
https://www.amazon.com/dp/B0CHJQ6CXF
https://www.amazon.com/dp/B0DKXLNFCF
Warning: this will lower your print volume around the nozzle wipe a bit, so please make sure to steer clear of that area with your prints to avoid a collision.
Copy and paste this Gcode into your printer.cfg (This is a WIP, so some tweaking depending on your Z-Offset will likely be required):
#Gcode Macro to clean the nozzel on the custom wipe before a print starts
[gcode_macro NOZZLE_WIPE]
gcode:
G90 ; Absolute positioning
G1 Z20 F6000 ; Raise Z to a safe height
G1 X35 Y226 Z20 F6000 ; Move to start of wipe area
G1 X35 Y226 Z9.8 F3000 ; Lower to wiping height
G1 X90 Y226 Z9.8 F5000 ; Wipe right
G1 X90 Y223 Z9.8 F5000 ; Step down
G1 X35 Y223 Z9.8 F5000 ; Wipe left
G1 Z20 F3000 ; Raise back up