1 / 4
Inlet Spacer for Arctic P12 120x25mm fans — image 1
1 / 4

Inlet Spacer for Arctic P12 120x25mm fans

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Artic P12 inlet spacer version of the NA-IS1-12 that improves airflow and/or acoustics in an intake mounting position.

Rating
0 / 5
Likes
18
Downloads
172
Makes
0
Views
1,034
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

Noctua fans are fantastic, however, not very budget friendly. A very close competitor for PC case fans is Arctic, specifically, the Arctic P12. I happened to have these fans installed in my rig and decided i wanted to try out Noctua's freely available model.

This is a remix of their inlet spacer which, according to Noctua's testing, is supposed to improve both acoustics and performance when a fan is installed in an intake setup.

Quote from the original design by Noctua_at

The NA-IS1-12 is a 5mm thick intake side spacer frames for Noctua 120x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills, perforated plates, mesh panels, filters or radiators. By offsetting the fan from the obstacle, the NA-IS1 inlet spacer reduces influx turbulences, which can, depending on the application and fan model, not only improve airflow but also significantly reduce overall noise levels and make the fan sound more pleasant to the ear.

https://noctua.at/en/na-is1-12-sx2

https://noctua.at/en/na-is1-performance-guidelines

Because the Arctic P12 lacks any vibration dampening, I've included a version which has attachable TPU feet that should do the trick. If you happen to have a Bambu AMS, don't try to print very flexible TPU straight from it… trust me. Use the external spool mount instead.

The TPU feet, in my case printed in 55D shore, snap into the inlet which makes installation super simple.

I've modeled the inlet to be entirely printable without supports by using short overhangs and a bore overhang method I've seen commonly used by Voron printer parts. I've found a video by Maker's Muse explaining it here if you're interested.

Noctua sells this kit separately and supplies screws with it. These are standard PC case fan screws except longer to accommodate the extra length required to reach the fan through the spacer.

I didn't have any longer ones, and since I was only installing these in the bottom of my rig, i just used DIN912 M4x30 screws and secured them with bolts. If you have access to some rubber/rubberized washers you could use those as well to protect your case. Not sure if this does anything else though. Could just yolo it.

P.S. If at all relevant to you, I used this video to mount my fans. I've got an ASUS AP201 prime case which has 1 back, 3 top and 3 bottom fan mounts. (We don't like watercooling in this house.)

The video by Kleo Yan describes how fan mounting setups affect temperatures and power draw in this case specifically, however, similar methodology can be applied to other cases. Here's the video if you're at all interested.

And here's the TLDR if you don't have the time for that. Setup A is the most efficient according to his testing, which is way more testing that I'm willing to do, so I trust it wholeheartedly lol.

Again, credit to Kleo Yan on Youtube for the info-graphic.

Tags