Phone Dolly
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This dolly is meant for smooth rolling shots with your phone (or GoPro)
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 61
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
INTRODUCTION:
This phone dolly is meant for use on a desk or flat surface to create smooth rolling shots. There are currently mounts for a phone or GoPro.
PRINTING INSTRUCTIONS
- Print Material: PLA (and TPU for “TPU - Wheel Treads”)
- Layer Height: 0.15mm
- Infill: 25%+ (Print the “Bolt”s at 100% for best results)
- Support required for “Base Bottom”
MATERIALS:
There is some hardware (M3 screws) associated with this build for mounting the wheels.
- M3 Screw Kit: This is the M3 screw kit I used for this dolly, (and most of my 3D modeling projects.)
(As an Amazon Associate I earn from qualifying purchases). If you would like to support my modeling this is a great way to do it!
A PRECAUTION:
Depending on how smoothly your TPU wheels print there will be varying vibrations and shakes in the design. In the future I would like to experiment with more wheels to decrease vibrations even more. Regardless, use a stabilization software - most phones have them already built in - for the best results.
If you do print this design please let me know how it works for you, and what upgrades you would like to see!