HueForge Welcome to Hazbin Hotel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Welcome to Hazbin Hotel. Hueforge three sizes (+sources)
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 73
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
Welcome to Hazbin Hotel. Hueforge. You can use 4 colors or 6 if you want. 4 colors will not give authentic colors as on original picture. Printed on Neptune 4 max with PETG.
100% infill, one wall.
First layer: 0.2
All others: 0.08
Make sure you don't have over-extrusion as it dramatically ruin hueforge. I'm prefer to calibrate using cube with one vase wall and set flow to 97% after first layer to make sure there is no over-extrusion.
Swap Instructions:
Start with Black
At layer #4 (0.44mm) swap to Red
At layer #9 (0.84mm) swap to Yellow
At layer #15 (1.32mm) swap to Beige
(You can stop here if you don't care about Vaggie :D)
At layer #19 (1.64mm) swap to Purple
At layer #20 (1.72mm) swap to White for the rest.