Benchtop DC Power Supply
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.05 – €1.28 net (excluding VAT)
For file: rest_of_parts_0.2mm_PLA_MINI_1h11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.16 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.19 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
24V 8A variable benchtop lab power supply
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 93
- Makes
- 0
- Views
- 674
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Benchtop Powersupply
I built this power supply for my electronics projects. I mostly used modules so there is no need for building circuitry, the parts just need to be wired together.
The case is designed to be printed on the Prusa MINI.
List of materials:
- 4 banana jacks
- 24V 8A SMPS
- 2 10 kohm potentiometers
- 2 500 ohm potentiometers
- 4 potentiometer knobs
- 100V 10A ammeter and voltmeter (like this one: https://www.aliexpress.com/item/1005003626996290.html?gatewayAdapt=glo2deu&spm=a2g0o.search0304.0.0.11155ae8NCrp8C&algo_pvid=9a9e0044-229b-45ce-882f-6fe42f0b2bec&algo_exp_id=9a9e0044-229b-45ce-882f-6fe42f0b2bec-1)
- 300W step down convertor (buck convertor) with adjustable voltage and current limit (ex.: https://www.aliexpress.com/item/32807052041.html?spm=a2g0o.productlist.0.0.1cb54f02DkYZAn&algo_pvid=faf4564a-77d8-4f66-96a6-5db7ff998594&algo_exp_id=faf4564a-77d8-4f66-96a6-5db7ff998594-6&pdp_ext_f=%7B%22sku_id%22%3A%2210000001106053546%22%7D&pdp_pi=-1%3B2.63%3B-1%3B-1%40salePrice%3BUSD%3Bsearch-mainSearch)
- 5mm LED
- 270 ohm resistor
- on/off switch (SPST)
- fuse holder
- fuse
- AC power plug connector + AC power plug cable
- USB A breakout board
- 5V power adapter
- M4 fork terminal crimp connectors
- 5.5mm ring terminal connectors
- snap on terminal
- stranded wire (thin)
- stranded wire (thick) - from AC cable, for example
- heat shrink tube - different diameters
- flat head M3 screws
- endseal terminals
- screw terminal block
Tools:
- soldering iron
- flux and solder
- wire cutter
- wire stripper
- terminal crimper
- screwdriver
- pliers
Printing the case
I used PLA+ for all the parts.
The front panel requires a filament change so that the text is more visible.
If anyone wants to add some changes to the model, I have also attached the .f3d file for it.
Assembling the electronics
After desoldering the trimmers and bicolour LED from the buck converter, the circuit of the power supply can be constructed by following the schematic:
^attaches as PDF in files tab as well
I have to add that I am not an expert so won't assume any responsibility for possible mistakes in my design.
I hope that this project is somewhat helpful.
If you have any questions, feel free to leave them in the comment section.
I wish you ‘Happy 3D-Printing and Building!’