1 / 1
Crowned Pulleys
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two crowned pulleys with a 20.2mm thickness. for 6mm and 5mm axle
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two crowned pulleys with a 20.2mm diameter at the thickest part. The taper angle is 10 degrees for the shorter and ~8 degrees for the longer resulting in the same diameter.
- One is 60mm long, 20.2 thick and has a hole for an axle that is 6mm x 20mm
- The other is 70mm long, 20.2 thick and has a D shaped hole for a 5mm x 20mm axle.
The D-shape axle is intended for a Nema17 stepper motor.
They are intended for a flat belt.