Flexible Scalemail Bracer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an innovative and functional 3D model of a full arm bracer, designed with practicality and durability in mind.
- Rating
- 0 / 5
- Likes
- 32
- Makes
- 0
- Views
- 675
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Standard Digital File License
The bracer is crafted as a single, seamless piece, emphasizing both aesthetic appeal and structural integrity
Printing Settings
- Filament Material: PLA
- Layer Resolution: 0.2 mm
- Infill Percentage: 15%
- Supports: No
- Brim: No
- Bed Temperature: 60°C
- Nozzle Temperature: 210°C
Printing Information
- Nozzle Size: 0.4mm
- Estimated Printing Time: Approximately 15 hours 56 minutes
- Print Volume: 245mm (width) x 192mm (depth) x 9mm (height)
- Printer Used: Prusa i3 MK3S
- Slicing Software Used: PrusaSlicer
Additional Information
Ensure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary.