1 / 5
Galileo 2 G2E Umbilical Cable Relief Mount Compatible with BTT EBB SB2209 USB
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cable relief for the BTT EBB SB2209 USB tool board umbilical compatible with the PUG system.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 158
- Makes
- 1
- Views
- 919
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
I found the existing options for cable relief of the BTT EBB SB2209 USB were lacking in one way or another. So I made my own. My goals:
- Relieve strain on the umbilical cable.
- Compatible with the PUG system.
- Allow greater access to the extruder/top USB port on the board.
- Ensure that the umbilical isn't too much higher than the toolhead (which would reduce usable Z volume).
- Make it somewhat pretty/consistent with the style of the Voron 2.4.
Print with the normal Voron standards. no supports needed.
You will need two standard Voron m3 heatset inserts, one 50mm m3 screw, and one 40mm M3 screw.