CTP2 Charger Board Mount - DIN Rail Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed CTP2 Board Mount by emre kerem özyurt. Modded for DIN rail mounting. Uses DIN Rail Bracket Redux by herr_brain
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
Simple modification made to mount emre kerem özyurt's case for the CTP2 PD board to a DIN rail for my 3d printer. Also utilizes the 51mm hole-spacing DIN rail bracket from herr_brain's DIN Rail Bracket Redux.
Requires 4x m3x4x5 heatset inserts (I used Voron spec inserts). Two inserts are used in the DIN Rail Bracket and two inserts are used in the interface plate.
Also suggest using 2 m2x16mm screws to attach the two case halves together - pre drill the top with a 2mm bit to clear out the plastic and make it a bit easier.
I didn't manage to snag a picture of the one that I printed, but I've printed and verified that it works well.
STEP file included for further modifications as desired.
Use the 51mm hole spacing DIN Rail bracket from herr_brain's design here: https://www.printables.com/model/472505-din-rail-bracket-redux
WARNING: If you use this model, you're going to be dealing with electricity. You are responsible for your own safety. You must be knowledgeable about what you're doing. Sufficient knowledge will help you reduce your risk of bodily harm or death and damage to your property. Use of this model means that you have assumed all risk associated.