1 / 2
E18 Magazine Follower Modified
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of D2 Magazine Follower to remove sharp edges and prevent binding.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 46
- Makes
- 1
- Views
- 189
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
4/14/25 Update: Added STL per request.
Smoothed out a lot of the sharp edges in part D2 for the E18 rubber band pistol. Modified part slightly to allow the part to be printed on flat side without any support.
Don't forget to set xy compensation to -0.1mm
Note that the red prints are test prints using 0.1 mm layer height while the green print is 0.2mm layers.