1 / 4
In-sink Compost Bin
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handy compost bin that hooks over the central divider of your sink.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 20
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- A handy compost bin that hooks over the central divider of your sink.
- Holes in the bottom allow liquids to drain out, making for less mess and easier carrying.
- I printed it in white since that was all I had at the time, but you should probably go for something darker if you care about the appearance- it will get dirty!
- The version posted here has a hook radius of 0.83" and a height of 7.5" from the inside of the hook. If you need to change these dimensions, go to the onshape document, make a copy and edit the #height and #radius variables to the desired values. Please reference this when measuring to ensure you measure the correct distances on your sink:
- Note: the height should be 1/4" or so short, so that the bottom of the bin does not rest on the bottom of the sink. The radius should be about 1/16" too big, so that the hook fits comfortably around the sink divider.
Enjoy! Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
**Supports:**
Yes
Filament Material:
PLA
Category: Kitchen & Dining