1 / 5
BMW R1300GS Vario Topcase strap eyelet replacement with skidpads — image 1
1 / 5

BMW R1300GS Vario Topcase strap eyelet replacement with skidpads

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

BMW R1300GS Vario Topcase Gurtösen Ersatz durch Gleitpads, wenn die Ösen nicht benötigt werden

Rating
0 / 5
Likes
1
Downloads
15
Makes
0
Views
122
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

BMW R1300GS Vario Topcase strap eyelet replacement with skidpads in different colors, if you dont need the eyelets.

The skidpads on the title picture are printed in PETG Galaxy Silver 

Mounting instructions

Remove the original strap eyelets by loosening the two screws per eyelet with a Torx 20 bit. Mount the 3d printed skidpads using the 3d printed dome head nuts with a 10mm socket wrench, tightening torque 2Nm

Printing instructions

  • These are recommendations based on testprint results (Prusa Slicer)
  • PETG or ASA (tested only with parts printed with PETG filament)
  • 0.4 nozzle
  • 0.2mm Structural
  • no support
  • infill 100% for the skidpads
  • infill 20% for the dome head nuts

Tags