Poly Clone Hero Arduino Pro Micro mount retrofit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a little add-in plate for mounting an arduino pro micro in a poly clone hero controller
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
just a simple plate mount that can be glued in between the bottom frame rails of the guitar body.
i use and recommend a USB-C variant of the pro-micro because the tight space for the cable to plug in and out of the body can be a bit rough on a micro-usb connection.
the plate includes two holes for M3 heatset inserts and a top snap-on bracket that will pin the pro-micro in place, but be totally removable if you dont want to tape or glue the pro-micro down to the plate. just be sure to leave space for that bracket in the holes you choose to solder the wires into.