Exaust Isolator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3d printed exhaust idolator/rubber exhaust hanger
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 26
- Makes
- 0
- Views
- 204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This part allows for the maker to replace worn or damaged exhaust isolators with a TPU 3d printed version. This helps fix droopy exhaust and is much more elegant than a coat hanger or mechanics wire. Recommended print settings are 2 perimeters, 25% gyroid in fill with no top or bottom layers. If needed top and bottom layers can be added to help prevent wear from debris but this will make the idolator much stiffer. This model should match the isolators on a 1998 ford mustang but should be scalable to fit other vehicles. If you need different dimensions feel free to reach out or remix it. This has been tested on multiple vehicles for long periods of time with great success.