Magnetic Build Plate Corner Guides for Elegoo Neptune 3 Series (and other printers and build plates)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Build plate guides with holes for 6x2mm magnets. Fit many printers / plates, but specifically made for my Neptune 3 Pro.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 82
- Makes
- 0
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I designed these to fit my Neptune 3 Pro and to include holes for magnets.
If you have the Neptune 3 Pro, be sure to use the Main files ("trimmed" in file name).
If you have a Neptune 4 Series. Make sure the aux fan clears the brackets first. You can either resize them to shorten their height (if you do, lower the hole a bit and then the height of the main part.) You can also make the flat base a bit thicker (which I tried and it worked). Or third option is to add several pieces of VHB tape to lower it's height. That may be the easiest, but possibly the least long-term effective.
However, they should fit most printers. I provided the versions that were left non trimmed from the original model. They do have the holes for the magnets, and improved thickness. I just didn't shorten them. You can choose to resize them how you prefer, with the Fusion Files.
The holes are precise to fit 6x2 magnets.
Settings I used: 0.4mm Nozzle, 0.2 Layer Height, PETG+
I also did these in PETG, which is fine as well.
I used VHB tape as seen in the image, to stick them to the bottom of the heat bed.
Also, I used acrylic glue to hold the magnets in, even though it's a good fit.