USB cable organizer (screw mount or use command strips) - Muliple Sizes

These are USB cable organizers designed to be wall mounted, either using #8 screws, 3M Command Strips or double sided tape.  

The 6 place cable holder has 4 places for thicker cables (5mm openings) and 2 for smaller ones (4mm openings).  The smaller organizers all have spaces with 5mm openings.

There are 3 versions which have different wall mounting options:

• The first has “PLAIN” in the filename, and can be mounted with double sided tape.
• The 2nd design has “CM” in the filename, for use with 3M command strips, it has a small cut out on the side to help with removing the command strip.
• The final has “SCREWS” in the filename, and uses screws. The screw holes are designed for a #8 screw. 

These can printed either flat or in the tall orientation without supports, or in the case of the screw mounted version, minimal supports (see pics).  I recommend printing in the tall orientation for a better surface appearance (so rotate the parts 90°).

This is a remix of my USB organizer design linked below, where you can also find the STEP file for that model.

https://www.prusaprinters.org/prints/79612-usb-cable-organizer-screw-mount-or-use-command-str

If you need a version to support thinner cables, check these out:

4 and 3 slot versions which support thin and normal USB cables.

6, 4 and 3 slot versions which support thin USB cables.

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here on Printables to see what new stuff I post.  Thanks for looking!