Safety Cap / Bleach Bottle / Tab lock Cap Opener
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.20 – €3.91 net (excluding VAT)
For file: Bleach_Opener_V1_0.4n_0.15mm_PETG_MK4IS_3h29m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.55 excluding VAT (range midpoint).
- Weight reported by the author
- 49 g
- Print time reported by the author
- 3.49 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A device to open 'tab-lock' caps, such as on domestic bleach bottles
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 46
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A simple tab clamp for bleach bottle ‘tab-lock’ caps and similar. Will accommodate caps with radius 20-50mm (external tab diameter)
Suitable for anyone with a weak grip or forearm strength restrictions such as MS sufferers (one in particular for whom they were made); but equally for anyone with those restrictions, irrespective of cause.
Printed in PETG. Print in place (PIP) hinge. 25% infill seems adequate. No supports required.