Beta Qidi Plus4 Beacon RevH Mount Front or Side
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Beacon Mount is for mounting directly to the toolhead cover there are two versions a side mount and front mount.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 26
- Makes
- 0
- Views
- 463
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mods the stock fan so that there is a place to mount the Beacon RevH. There is also a hole for the cord to go.
Use normal Beacon RevH's not the low profile versions
- First version mounts on the front, the hole is for the cord to go behind the toolhead cover and remain hidden
- Second version mounts to the side and allows continued visibility to the nozzle from the front.
The distance to the center of the nozzle is approximately 7.75mm and the distance from the bed is approximately 2.6mm but you should really do your own measurements.
This is not tested, I do NOT know if the printed version of the toolhead cover is stiff enough and would not vibrate or shake during measurements. However, measurement of the bed only occurs during initializing the print and shouldn't be an issue since most vibrations occur during printing.
I would recommend a stiff filament with CF or GF