Easter Basket 2025
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€18.51 – €22.62 net (excluding VAT)
For file: Easter Basket_0.15mm_PLA_MK3S_1d1h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €20.57 excluding VAT (range midpoint).
- Weight reported by the author
- 148 g
- Print time reported by the author
- 25.81 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A decorative basket for Easter!
- Rating
- 0 / 5
- Likes
- 49
- Downloads
- 298
- Makes
- 0
- Views
- 818
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Spring & Easter
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
At 100%, the basket is large enough to hold 2 USDA large chicken eggs. If you have a large printer, it should scale up well.
This is designed to be decorative. Don't print it with PLA, fill it with candy, and be surprised when the handle breaks.
It needs organic supports - even if you don't use them on the handle. I set an overhang angle of 35 degrees to add supports at the sides and the handle. It increased the print time by less than 10% and used about 9g of filament.
I used 2 perimeters everywhere. I added infill for the bottom 12mm (15% rectilinear) and the top 45mm (25% honeycomb). In between, there were a couple areas that weren't well supported internally, so I added rectilinear infill using 4 shape modifiers.