Vixen Dovetail Laser Adapter - Straight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Laser holder for Vixen dovetails. Very useful for polar aligning equatorial (EQ) mounts.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 31
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a laser holder for Vixen dovetails. This can be used to help polar align equatorial (EQ) mounts.
This version is the straight thru model. If you have a ZWO Seestar, you'll want the right-angle version I made for use with EQ mounts due to the position that the Seestar is held by the mount. It is available here: https://www.printables.com/model/1260225-vixen-dovetail-laser-adapter-for-zwo-seestar-right
This can be used with the generic green lasers that you can easily pick up from various vendors inexpensively. I bought mine from eBay for $10. Look at the photos to see exactly which one works best. This is designed for lasers with 22.5mm diameter. I also have another laser that has a different handle, measuring 23.1mm, and it also fits and would work, although not quite as perfectly.
For hardware, you can use any M5 screw - would recommend between 16mm and 25mm long. Or you can use my M5 thumb screw, which I use with M5x30 hex head cap screws. Here is that design: https://www.printables.com/model/1260196-m5-hex-thumb-screw-knurled
Also, I've included my Rotary Laser Pointer Switch, found here: https://www.printables.com/model/1260429-laser-pointer-switch-rotary