1 / 3
Dripper with irrigation hose connections
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed a model to use less filament and connect to a 1/4 inch irrigation hose.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 109
- Makes
- 0
- Views
- 807
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
To connect a hose; first heat up some water in a small mug and place the end of the tube you want to connect in the mug (this is to soften the hose to make it easier to slip on.) Apply some petrolium jelly (vaseline) to the connector then use a tool such as this to slip the tube on.
Print with 0.16mm resolution and 4 walls on for the first 38mm of the print to ensure strength.
I recommend printing with PETg.
See original for further notes.