Micron Canopy Center 4010 Fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mod to add fan exhaust(s) to your top canopy mod for Micron printers.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I wanted to add an exhaust fan to my Micron+ R1 to keep the door closed when printing PLA or PETG, and instead of making a new hole on my panels, I figured I could try using a couple of smaller fans that would fit in the center piece which is used for decoration in the Top Canopy.
Note that you will need to install the canopy part on the top extrusion before installing the fan, as the fan will interfere when trying to screw it in.
When installing the fan, you can use the slit to route the cables inside your printer and keep them closer to the extrusion to help keep things tidy.