1 / 3
Magsafe phone mount for bicycle or motorcycle [parametric] — image 1
1 / 3

Magsafe phone mount for bicycle or motorcycle [parametric]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Parametric mount to secure a phone with magsafe to hold it in place and charge it. Secure enough for MTB.

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
232
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

--Still need to grab another camera to take pictures and videos with my phone in the mount and the charger installed.

Every post on the internet about mounting a phone with magsafe is just nannys saying it won't work. I set out to make one that prevents the phone from falling off by gripping the sides and retaining by the bezel with the primary retention still being the magsafe magnet.

The side rails provide just enough pressure to prevent a bump from jarring the phone loose but still allows it to easily slide in and out. The parameters in the parametric model allow fine tuning for exactly how tightly you want it to grip.

No need to remove the case or buy a special case to mount your phone to a bicycle or motorcycle or any application where it may get jarred loose from a magsafe mount.

Tested with an iPhone 15 Pro Max but should work with most modern phones without pressing any side buttons or interfering with the camera bump.

A future version will have compliant mechanisms for the side rails so the phone can be directly snapped into place but for now it needs to be slid in from the top. Compliant shapes are quite difficult to write in OpenSCAD.

Hardware used

  • Rokform V4 Pro Series Stem Bike Mount
  • M5 x10mm countersunk flat head socket cap machine screw and nylock nut
  • Apple MagSafe charger

The Rokform arm replaces the stem cap on my bike but it can be mounted to anything that accepts a single central machine screw. If there is interest I can make a version that has parametric tube mounting to attach directly to handlebars.

The cable just runs to a top tube bag that can hold a battery for those long days.

Prototypes printed in PLA with a 0.6mm nozzle and no supports.

Final version printed in ASA-CF with a 0.4mm nozzle and fuzzy skin at 45 degrees to the build plate with tree supports.

Tags