Meinl Didgeridoo stand for saxophone stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A conversion of a clarinet / soprano sax stand to hold a Meinl Didgeridoo
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
I have a tenor / alto saxophone stand that has a soprano / clarinet stand built in.
It uses a regular M8 screw to mount, and the stock one was not so good for a Didgeridoo. As I have no clarinet or soprano sax - I used the stock stand but it was not holding the didgeridoo firmly.
The model is a friction fit conical stand with a built in hole for an M8 screw. It is very deep and I added a nut to tighten it in position with the added benefit of stabilizing the whole assembly eliminating horizontal movement.
I used an M8x40 screw + a Nut. I think it will work with other sizes as well. The internal hole is 29mm deep as that was needed in my case to hold everything firmly.