1 / 3
8BitDo Pro 2 stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A stand designed for the 8BitDo Pro 2. Holds and charges the controller "right way up" so it is easy to access.
Print the main part with the base down, and the clamp with the flat side down using supports for the two little protusions. The .STL files are in the correct orientation. I used 0.15mm layers.
To assemble, add an M3 brass insert to the base. Slide the charging cable into the base and poke it into the seated position with an hex key or similar. Then slide the clamp into place and secure with an M3 12mm screw.