Liner for Tesla Mobile Connector Bag
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bag liner helps organize Tesla's charging cable and bits.
- Rating
- 4.96 / 5
- Likes
- 338
- Downloads
- 1,136
- Makes
- 30
- Views
- 8,966
- Reviews
- 25
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Update 2025-02-12: Removed Tesla-promoting text from description.
If you're slightly annoyed that it's hard to stuff your Tesla's charging cable and adapters into their bag, then you need this liner. It holds the parts in place so you can get the bag zipped. It also has a big Tesla logo hidden away where nobody will see it.
The liner is printed in four parts to fit an i3 size printer. The parts are held together by M5 screws and nuts. It was designed to fit the Gen 2 Mobile Connector Bundle for North America, though it may also fit other regions' cable kits.
I modeled this in Fusion 360. I've included the model in .f3d and .STEP format.
Print Instructions
Print in PLA. I used the Prusa 0.30mm DRAFT Generic PLA print settings. Set a color change at 1.4mm on each part. If you want Tesla's color scheme, print the bottom layers in white or grey and the top in red.
Vitamins Needed
- 4x M5 by 45mm screws, McMaster 91290A260 or equivalent.
- 4x M5 nylon locknuts, McMaster 94645A102 or equivalent.