Lion Leather Press
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a leather press for my chronicles of Narnia book so I made Aslans head
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 46
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I was rebinding my chronicles of Narnia book and needed a leather press for the covers center piece.
I recommend you don't down scale it down because the small parts are hard for my printer to print at the size it is. but feel free to down scale it if you have a 2mm nozzle or up scale it.
you will probably want to print the model letters down, and with support. (normal support works best) you can print it with 15% infill but depending on how much pressure you are putting on it you might want to use 100%. or you can increase the wall loops.
you can find the Narnia logo stamp here https://www.printables.com/model/1170966-the-chronicles-of-narnia-leather-press-leather-sta
and the c.s. lewis stamp here https://www.printables.com/model/1262920-c-s-lewis-leather-press
And check out my page for other leather stamps. I have a bunch there