Strange Bird SB29 Forward Swept Wing FPV Plane with Landing Gear

This is the Strange Bird SB29 RC wing ideal for FPV.

Features:

• Air Frame weight (no battery): 350 grams 
• Wing Span: 29.1 inches (740 mm) 
• Steerable Nose Wheel
• DJI Camera Platform
• 3D printed Motor Mounts, including Wheels and Tires (TPU)
• Wire Landing Gear
• FULL PDF files for 5mm Foam Board (Tiled PDF for A4 and US LETTER)

List of additional parts can be found here:

• Three sheets of 5mm Foam Board
• 1.5 mm Diameter Wire for control and tail wheel:  https://amzn.to/4i7QV3t
• Main Landing Gear Wire 2.3mm diameter:  https://amzn.to/3QLmBjT
• Servos: X3 - MG90D (metal gear digital) https://amzn.to/3CTAYiA 
• Motor: - Emax ECO II 2306 - 2400kv https://amzn.to/4jtLY5P
• 5x3x3 props:  https://amzn.to/413wEFr
• 1300mAh - 2200mAh 3S Lipo 
• 30 AMP 32-bit ESC: https://www.getfpv.com/v-good-rc-32-bit-30a-2-4s-brushless-esc-for-rc-airplane.html
• Camera - DJI Vista / Link: https://amzn.to/49ryz9t
• Goggles - DJI FPV Goggles:  https://amzn.to/49ryD9d
• 4x1mm Carbon Strip for Wing Bracing 
• EZ-Connectors:  https://amzn.to/3CNAYRj
• Optional 180 degree digital servo for camera pan:  https://amzn.to/3PqgLDP
• Colored Packing Tape:  https://amzn.to/4jf8nVa
• 3M 25mm long nylon bolts:  https://amzn.to/4jyWv0o
• 3M nylon nuts:  https://amzn.to/3CpkRZN

Printing Settings:  

• I used Overture Matte PLA:  https://amzn.to/3wxdw7p
• 3 wall layers
• 35% in-fill
• 0.2mm layer height
• Some Parts print best with supports but not required
• Print the Tires in TPU with 2 wall and 0% in-fill

This builds very similar to the D2 Delta Twin model – check out the detailed build video https://www.printables.com/model/1199182-d2-delta-twin-rc-plane-fpv-platform

*Please reach out with questions.   I would love for you to share your makes here.  

Thank you!