Modified Mounts for MP3DP V5 for Dragon Burner Hotend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two versions to allow mounting a Dragon Burner (or most of Chirpy's hotends).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
One version allows a direct replacement of the stock parts and retains the belt configuration of stock.
The other version reverses the X axis and places the belt path on the back side of the rail. This allows the nozzle position to be roughly 31mm from the center of the rail and reduce any lever action.
My machine was built with a 300x325 size but uses a 300x300 bed. This allows some space eon the sides of the bed to implement filament cutting and poop/nozzle brush mechanisms.
Editing the V5 cad and changing the 31mm measurement in the Frame and Bed sketch to 55mm for the rear belt version and 85mm for the front belt version will allow the hotend to stay within the confines of the frame to allow enclosure.