Low primer sensor
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.15 – €0.18 net (excluding VAT)
For file: Primer_sensor_0.2mm_PLA_MK3S_12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.16 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Low primer sensor. Add on to Dillon primer sensor used for external control systems (eg. Mark7 Autodrive).
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 40
- Makes
- 0
- Views
- 795
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Add on low primer switch. Placed on original Dillon Primer check, used as signal source for Mark7 Autodrive or other external control systems.
Microswitch used (for example): https://www.aliexpress.com/item/4000638031271.html
Use CA glue to attach the sensor plate to the microswitch lever.
Additional weight needed on the primer rod for reliable functionality.