Drone Hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn your stack of miniquads into art!
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 43
- Makes
- 1
- Views
- 821
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Turn your stack of miniquads into art!
This hook attaches to the wall using Large 3M Command Mounting Strips. Be sure to follow the directions and wait 1hr before hanging the quad on the hook.
The clip may look thin, but it's plenty to hold a miniquad. The flexibility of the material (ABS) allows one to slide a slightly taller drone-arm in and out easily.
The original Fusion360 model is here: http://a360.co/2xGc0LO
Print instructions
Category: Hobby Print Settings
Printer: i3 clone
Rafts: No
Supports: No
Resolution: .2mm layers, .4mm nozzle
Infill: 65%
Notes:
I used ABS. print the hook vertically, as shown in the timelapse: https://youtu.be/jdVDLPDweJA
If you find this model useful, consider buying me a ko-fi: https://ko-fi.com/natester