Silica Container for IKEA 365 with Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Completely new designed Silca Container. I made the overhangs a lot easier to print, designed a new lid to clip on.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 55
- Makes
- 0
- Views
- 314
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Completely new designed Silca Container for the IKEA 365 Box.
I made the overhangs a lot easier to print, designed a new lid to clip on.
I tested different print settings and found the best one for use:
- crosshatch Infill @ 20%
- 6 walls
- no top and no bottom layers
- seam backside
- 0,2 layer height
The Container is designed to be printed in ABS. So it can be put in any filament dryer to dry the silica gel.
So you don't have to get the silica out of the container for drying. Thats also the reason why the bottom is also using only infill, to get air through.
If you are only using the boxes for keeping the filament dry, you can put 2 of these in the box.
One in the front and one in the back, this keeps the spools from rolling around.