1 / 1
Gridfinity Hex Screwdriver holder (with embedded magnets)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hex screwdriver holder for the Gridfnity storage system.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 31
- Makes
- 0
- Views
- 172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a hex screwdriver holder for the GridFnity storage system.
It uses embedded 6x2mm magnets to attach to base plate.
This is the base plate i use it with :
https://www.printables.com/model/1265400-gridfinity-wall-mount-base-plate
Required hardware:
- 8x 6x2mm magnet
Instructions:
To install the magnet, you must add a pause instruction at layer 13. When the printer pauses, install the magnets and resume printing.
IMPORTANT: Make sure that the magnets are all put in the same orientation as the ones in the base plate so that the magnets attract each others.