1 / 1
Gridfinity tweezer and brush holder (with embedded magnet)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a tweezer and brush holder for the GridFinity storage system.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 52
- Makes
- 1
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Required hardware:
- 4x 6x2mm magnet
This is the base plate i use it with : https://www.printables.com/model/1265400-gridfinity-wall-mount-base-plate
Instructions:
You must add a pause instruction at layer 13. When the printer pauses, install the magnets and resume printing.
IMPORTANT: Make sure that the magnets are all put in the same orientation as the ones in the base plate so that the magnets attract each others.