Fireboard 2 Pro Adapter for Masterbuilt 560/600
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Backplate that uses the original screws and mount. Faceplate that mounts using four 6x3mm magnets.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 56
- Makes
- 0
- Views
- 457
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Print the backplate with the fireboard opening down and your choice of supports(I used tree).
Print the faceplate with magnet holes up, no supports needed.
Recommended to print with ABS or PETG since this will be outside.
Requires drilling access holes for cable unless you want to buy 90 degree adapters for the drive cable. If you want the fireboard to be removable, you will need to trim the metal opening as well. I store my grill outdoors with a cover, but I want to bring the Fireboard inside when not in use to keep it safe.
Planned update - Eventually I want to correct the corner radius of the faceplate to better fit the metal embosement.