1 / 2
Gridfinity glue stick holder (with embedded magnets)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Glue stick holder for the gridfinity storage system.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a Bambu Lab glue stick holder for the GridFinity storage system.
It uses embedded 6x2mm magnets to attach to base plate.
Required hardware:
- 4x 6x2mm magnet
This is the base plate i use it with :
https://www.printables.com/model/1265400-gridfinity-wall-mount-base-plate
Instructions:
To install the magnet, you must add a pause instruction at layer 13. When the printer pauses, install the magnets and resume printing.
IMPORTANT: Make sure that the magnets are all put in the same orientation as the ones in the base plate so that the magnets attract each others.