1 / 1
Two Handed Hammer or Axe
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two Handed Hammer or Axe printed from 1.1 kg of filament, You will need a 1 meter long 2 cm diameter stick too.
- Rating
- 3 / 5
- Likes
- 20
- Downloads
- 44
- Makes
- 1
- Views
- 347
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Two Handed Hammer or Axe printed from 1.1 kg of filament, You will need a 1 meter long 2 cm diameter stick too.
Use 1% infill and 4 walls for the heads, you can use support if you want but the "Tinside" support was made smaller to compensate for the sagging if you dont use supports.
You have to print the handle part 5 times.
You will need a 1 meter long 2 cm diameter stick for the handle.