1 / 2
More Clearance Qidi Plus 4 Auxiliary Fan HEPA Charcoal filter — image 1
1 / 2

More Clearance Qidi Plus 4 Auxiliary Fan HEPA Charcoal filter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a remix of LimeThemUp's Qidi Plus 4 Auxiliary Fan HEPA Charcoal filter. Added clearance and thicker filters.

Rating
5 / 5
Likes
12
Downloads
68
Makes
0
Views
495
Reviews
1

Updated at source:

Model information

License
GNU General Public License v3.0

Thanks to LimeThemUp for the original work and providing the step file.

I could not get the V3 right and left ducts to fit in place. They were too deep to fit between the side wall and the z rod mounts on my machine. 

 I took .75mm off the front face and 1 mm off of back face of the original right and left fan ducts. This model also supports filters that are 40 x 80 x 15 mm in size. I believe the original was designed for filters that are 14mm in depth. 

Installation is the same as the original except I opted to relocate the camera wire above the metal support plate, I reused the original p clamps and hardware. 

Also,  there was a very thin gap between the floor of the printer and the support block after installation. In the spirit of making sure this was easily removed when needing the auxiliary fan, I inserted a folded index card in the gap to take up the slack and keep the assembly from moving or rattling.

Tags