1 / 2
Heavy duty Y axis belt clamp For neptune 4 plus/max — image 1
1 / 2

Heavy duty Y axis belt clamp For neptune 4 plus/max

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

small belt clamp with compatilbility for double shear

Rating
5 / 5
Likes
9
Downloads
65
Makes
0
Views
434
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

How is this better than the stock one?

This belt carriage doesn't use belt clamps which damage and weaken the belts. When under tension the back side of the belt is pressed up against a metal corner which damages it further and leads to it ripping. Tested for 120kg of static tension with no noticable damage

This belt mount is designed for gates gt2 belts that are for the Netpune 4 Plus / Max  Y axis.

There is a cart available for Silenced frost's double shear mod that is necessary for the Neptune 4 Plus

 

Recommended print settings:

  • at least 4 walls

  • ~50% infill

  • Print as oriented

Recommended materials:

  • PETG

  • ABS/ASA (You should print with enclosure and heater to have enough layer strength)

  • NOT PLA

Any low creep material will do, but higher impact resistance and rigidity is recommended.

 

Make sure you tighten the screws that connect to the bed all the way or else the carriage can move around. Also don't tighten the clamps too much as the will start bending and crush the teeth of the belt. For better mounting you can use countersunk screws to screw it to the bed frame which will center the carriage and avoid backlash.

 

If you don't want to use additional hardware there also is a toolless version available:

https://www.printables.com/model/1144912-neptune-4-plus-max-y-axis-belt-carriage

 

BOM:

  • 2 M4 x 6D x 7L Threaded inserts

  • 4 M3 x 10mm screws

  • 4 M3 x 4.5D x 5L Threaded inserts

  • 2 M4 x 12mm Countersunk screw (optional)

  • Gates gt2 epdm Belt (affiliated) [N4Plus 1m, N4Max 2m]

 

  • 2 M4 x(10mm screws (only for New N4 Max bed)

Submit feature requests here!

Tags