Phone Holder for Golf 4/Bora
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.31 – €1.60 net (excluding VAT)
For file: Phone Holder_0.4n_0.2mm_PETG_MINIIS_1h5m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.46 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 1.08 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Small pin to keep your phone from falling over when placed below the radio.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 684
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I was annoyed by all cheap phone holders on the market so I just kept placing my phone below the radio. With the cover of the ashtray open, the phone kept slipping off at the bottom. With the cover open, it fell over at the top when accelerating.
I designed an insert for the ashtray which has a small pin that keeps the phone from slipping off at the bottom. Works perfectly for me, I have a Pixel 9 Pro, so a pretty average sized phone I would say.
Print the two parts separately, so no supports are needed. You can easily glue them together. I used PETG for better temperature stability in the summer. I also printed the Pin with 100% infill for more rigidity. Not sure if that's necessary but it does not need that much filament anyways.
Please ignore the dirt.