Grease Nozzle for M6x1.0 grease points
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits grease tubes 11.50 \ 12.00 mm diameter with 1.75 thread pitch.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
A grease nozzle to inject grease into M6x1.0 female threaded greasing points. Fit tubes with 11.50 to 12.00 mm x 1.75mm pitch threads.
I made this nozzle to inject silicone grease into a Vetus marine stern gland but it could have other applications.
I also made a cap for the nozzle to enable storage without removing the nozzle from the tube.
Nozzle printed vertically with a brim in PETG.
(Sorry don't have photos of the tube/nozzle installed because I made the parts for a friend and don't have them to hand).
Another apology - I put the wrong file on here earlier - now sorted.