1 / 3
Low Friction Spool Holder for QIDI Plus 4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool Holder for QIDI Plus 4
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Bill of Materials (BOM)
- 1 pc of M3x8mm to 20mm (M3x12mm SHCS is recommended)
- 1 pc of M3x20mm to 30mm (M3x25mm FHCS is recommended)
- 1 pc of Heat Set Insert M3 D5.0xL4.0
Printing Guide
- Print 2 pieces of the bearing
- Print the roller piece with support
Installing Guide
- Apply grease into the bearings through the small hole and rotate it manually until it moves smoothly.
- Insert the heat set insert at the top of the core piece.
- Secure the M3x25mm FHCS at the bottom of the core piece to reinforce its strength.
