Dispenser for tampons
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.77 – €5.83 net (excluding VAT)
For file: dispenser_0.3mm_PLA_MK3S_4h16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.30 excluding VAT (range midpoint).
- Weight reported by the author
- 88 g
- Print time reported by the author
- 4.26 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A dispenser for tampons. Made for diameters up to ca. 20mm and a length of 55mm
- Rating
- 4.625 / 5
- Likes
- 86
- Downloads
- 669
- Makes
- 12
- Views
- 3,125
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
This is a dispenser for tampons. Made for diameters up to ca. 20mm and a length of 55mm, e.g. “o.b. comfort super plus”. Holds around 15 - 20 pieces.
Ideally the pieces roll down the slope. Sometimes they can get stuck. A little shaking helps.
Fusion 360 file included for your tinkering.
Dimensions:
- width: 105 mm
- length: 60 mm
- height: 120 mm
Printing Parameters
- Layer height: 0.3mm or 0.2mm. The slope obviously looks better on 0.2mm
- Supports: yes, everywhere. Except you dialed in your overhangs. The overhang on the visible hole of the dispenser might sag without supports, but on the backside of the slope they will not be visible.
- Infill: 15%
- Material: PLA (Giantarm silk PLA copper)
- Slicer: PrusaSlicer 2.4 (Prusament PLA Profile)
- Brim: optional, when your adhesion is not optimal
- Printer: Prusa MK3S+
Print time/Material:
- on 0.20mm QUALITY default preset with supports brim: 8h20m; Usage: 30m, 89g
- on 0.30mm DRAFT defaullt preset with supports and brim: 4h21m; Usage: 30m, 89g