1 / 1
Ratrig V-core 4 left nozzle wiper for Mandala bed arms
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified version of the Ratrig file: PP000326-vc4_wiper_left_V01_20240319.stl from their GitHub.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modified version of the Ratrig file: PP000326-vc4_wiper_left_V01_20240319.stl from their GitHub. I removed some material on the bed side to clear the tall carrier and pin mounts on the Mandala Rose Works left bed arm. The right side wiper works in stock form.
NOTE: This model is the original height and will only work if you reduce the shim stack above the locating ball on the left arm to 4mm from the original 12mm. This will put everything at the stock height relative to the arm.