1 / 2
SlamDunk
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Project: SlamDunk_Collection1.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 224x168mmm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.8mm and the Actual Depth is 1.8mm
Filaments Used:
PLA 3DHoJor Black Transmission Distance: 0.1
PLA Sunlu Red Transmission Distance: 4.1
PLA Sunlu Yellow Transmission Distance: 6
PLA Sunlu White Transmission Distance: 5.9
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #14 (1.2mm) swap to White for the rest.