Clicky Clack Latch

I wanted a door handle for the fridge door mod that gave a bit more squish and found BadMouth's mod of the filament latches. I went ahead and remodeled most of it from the stl's but some of the original is still in there. 

You'll need two M3x8mm-30mm fhcs and two M2.5x8mm-30mm bolts. Holes go all the way through so use whatever size between. Mounting to the extrusion uses 6x M3x25 shcs and 6x hammer head nuts. Had to use hammerhead so I could retain the posts that sit directly against the inside of the t-slot. Keeps the assembly from twisting when mounted. 

The bolts thread into either side of the outer portion and rotate freely in the inner printed parts so the longer the bolt, the more support it'll have.  

In the future I'll probably make a new version with pins and bushings just to keep with the clicky clack door style.