Vertical Base for Blue Yeti Mic
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base for lowering the overall height of a Blue Yeti mic and still be oriented vertically.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 45
- Makes
- 0
- Views
- 179
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
This base for the Blue Yeti microphone allows you to lower the overall height but still have it oriented vertically.
In my situation, since the mic needed to sit in front of my monitors, the original base positioned the mic far too high, which interfered with my view of the taskbar at the bottom of the monitors, and any other orientation other than vertical severely impacted the accuracy of my voice dictation.
This base requires using a 90° USB Mini-B cable - $4.95 on Amazon: (https://www.amazon.com/dp/B00FSVHXQU), which significantly lowers the overall height - from about 12"' (304mm) down to 8 1/4" (209mm). The base incorporates a channel to route the USB cable out the rear, and I added small rubber pads to the bottom of the base which helps with stability.
Included are four versions of the model: One with a 1mm embossed “Blue” logo, one with a .5mm embossed “Blue” logo, one with .5mm raised “Blue” logo and one with a plain finish. All logo versions may be colored in the slicer or painted once printed.
The logo versions are for illustrative purposes only - I have no license to use the logo.