Yaesu FTM-500/510 Tesla Model 3/Y foldable display mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Folding mount for the Yaesu FTM-500/510 that attaches to the left bottom of a Tesla model 3/Y display
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 630
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
A variation of my original Yaesu FTM-500/510 Tesla model 3/Y mount that sits flush on the bottom left of the center console screen produced in collaboration with Sam M. He had a folding hinge bracket we fit to the model to allow you to swing the display back for concealment. Huge shoutout to Sam for the request and the awesome collaboration.
Important notes:
Hinge may be stiff but can be loosened with a metal wedge and hammer. M4 or M5 bolts can be used. If using M4, use M4 washers and nuts. Bottom bracket is optional but suggested. If not using the bottom bracket and mounting directly to stock FTM-500/510 mount, center hole in bottom part of bracket must be enlarged and adhesive pad/tape used to prevent rotation on the hinge. Let double-sided tape cure for a day before mounting your radio to it.
Parts used:
1x M4x20mm for the zip tied bolt (substitute M4x12mm if no zip tie will be used)
6x M4x12mm for the hinge
4x M4x16mm for the controller mounting to the bracket.
7x M4 nuts
7x M4 washers
2x 4mmx250mm zip ties (optional but provides extra stability)
4x strips of Scotch Mount Extreme (alt. 3M vhb or similar tape)
1x foldable support bracket as the hinge
Optional but highly recommended by Sam:
Bottom bracket for radio (optional but eliminates need to enlarge bottom hole on hinge, drill two holes in bottom for the bottom holes in the bracket)
adhesion promoter to use on the surface of the bracket to stick the tape to better.
Filament used: PAHT-CF but PETG may work depending on how hot your car gets in the summer.