Whirlpool WSC5533 A+X Fridge Freezer Servo Flap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the sliding flap between Freezer-Fridge compartments that the appliance uses to let cool air in from freezer…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 61
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
This is the sliding flap between Freezer-Fridge compartments that the appliance uses to let cool air in from freezer to fridge using small servo motor and thus control the temperature. The original part has weak spot in the "8-shaped slot" that fits into servo motor and can break over time. This part has been reinforced in the critical spot so it should last for long time. Symptoms of failure are too high (or too low) temperatures in fridge part, when you take out the light & air filter assembly and open the styrofoam to take the servo out you'll see that you can freely pull out the white tab from the servo, confirming the failure.
Example in the pic printed from ABS but PLA part is food-safe and will work the same. Original part is apparently made by FSP (Fortron) and bears M196 2315514 and 9114A part numbers.
Category: Replacement Parts