1 / 14
Manual reel with brake
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a simple smal, wall mounted reel. you need to print: 2x Scheibe 1x Kurbel 1x HalterL and HalterR or HalterL+R 1x…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 42
- Makes
- 0
- Views
- 345
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Just a simple smal, wall mounted reel.
you need to print:
2x Scheibe
1x Kurbel
1x HalterL and HalterR or HalterL+R
1x Welle
1x ZahnkappeLH or RH. LH if you want to have the Crank on the Lefthand side.
1x Blocker
Scheibe, Kurbel and Zahnkappe must be glued on Welle.
I fixed the Blocker with a wire from a paper clip.
Raft is needed only for Welle
for the crank I used a M6 screw.
Printing Time arround 6h
Print Settings
Rafts:
Yes
Supports:
No
0.2
Infill:
50
Filament:
Janbex PLA Multicolor
Category: Hand Tools